User`s guide

Using the Control Panel 80
IP address, Subnet mask, Default gateway
You can set the IP address, Subnet Mask, and Default Gateway to the printer. To change the
parameter, press the l Left or r Right button to move cursor and the u Up or d Down button to
change number.
Status and error messages
This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
Message Description
Cancel The print job is canceled.
Charging ink The printer is charging the ink.
Cleaning The printer is cleaning the print head.
Please wait The printer is starting.
The printer is initializing the settings.
Printing The printer is processing data.
Ready The printer is ready to print.
Power save The printer is in the power save mode.
Power off The printer is shutting down.