Installation guide

Troubleshooting 21
12. Click
OK.
13. Click
OK again to close the EPSON Scan Settings window.
Note:
If the printer’s IP address changes, you will need to repeat steps 1 through 13
to reconfigure Epson Scan network settings.
You’re ready to scan and print. See your printed documentation and on-screen
Epson Information Center for details.
Troubleshooting
If you have problems setting up or using your product on a network, check these
sections for help:
■ “Setup Problems” below
■ “Printing Problems” on page 23
■ “Scanning Problems” on page 24
This section also explains how to print a Network Status Sheet (see page 25) and
reset network settings (page 26).
Setup Problems
Software installation failed
Reset the printer’s network settings (see page 26) and perform a first-time
installation of the printer and software (see page 3).
Cannot connect to or find the wireless router or access point
■ Try connecting to the wireless router or access point with your computer or
another device to confirm that it is working correctly.
■ Make sure that the printer is within range of your wireless router or access
point.
■ Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or
large metal object such as a filing cabinet.