Installation guide

10 Connecting to Your Wireless Network
Selecting WEP Security Settings
1. Select Alphanumeric if your WEP key is ASCII, or select Hexadecimal if
your WEP key is in hexadecimal format.
Note:
If the WEP key is 5 or 13 characters, it’s ASCII. If the WEP key is 10 or 26
characters, it’s hexadecimal.
2. Enter your WEP key.
■ Press Menu to switch between uppercase (ABC), lowercase (abc), or
numeric (
123) characters.
■ Press u or d until you see the character you want.
■ Press r to enter the next character.
■ Press – to delete a character.
3. When you’re done entering the WEP key, press
OK.
Continue with the next section.