User's Manual

6.
Make sure the DIP switch settings are correct for the type
of monitor you are using. The Apex computer is set at the
factory to 80x25 color, for a color graphics monitor. If
you are connecting a monochrome monitor, you need to
change the DIP switch settings. See Appendix A for more
information.
If you are using a monitor other than a color graphics or
TTL monochrome unit, you’ll need to install another video
card in your computer. See Chapter 4, “Installing Option
Cards,” for instructions. You’ll also need to check the DIP
switch settings (defined in Appendix A) to be sure they are
set correctly for the type of video card you are installing.
Setting Up Your System
1-11