User's Manual

3. Press 1 and then Enter to select the Create DOS Partition
option. The screen displays:
Create DOS Partition
Do you wish to use the entire fixed
disk for DOS (Y/N)
. . . . . . . . . . . .?[Y]
4. Press Y and Enter. The system creates the MS-DOS
partition.
The screen displays the following message:
System will now restart
Insert DOS diskette in drive A:
Press any key when ready...
5. Press any key to restart the system. You do not have to
insert any diskettes because the DOS diskette is already in
drive A. Your computer begins reloading MS-DOS. After
the preliminary copyright information displays on the
screen, the date prompt displays.
6. Press Enter twice to accept the current date and time.
(Don’t worry about entering the correct date and time;
you’ll set the real time clock in a later step.) The A> prompt
redisplays.
B-12 Preparing a Hard Disk For Use