User's Manual

Software Problems
If you are having trouble with a software program,
check the following possible problems and solutions:
1. The software program does not start. Check to be
sure that you are following the correct procedure
for an MS-DOS application. Make sure you
inserted the application diskette in the top drive.
2. An application routine does not work. Refer to the
software manual and try the routine again
according to the instructions. If this does not work,
go ahead and reset the computer, reload the
program, and try the routine again.
Remember, to operate properly some programs require
the computer to run at 4.77 MHz or 8MHz. Try
changing the CPU operating speed by pressing the
SPEED button on the front panel. See “Selecting
Execution Speed” in Chapter 2.
6-6
Troubleshooting