User's Manual
Replacing the Cover
With the installation of your option card completed,
you have only to replace the cover of the main unit:
1. With the back of the main unit still facing you,
position the cover over the computer with the
front edge pointing slightly downward.
2. Lower the cover onto the main unit making sure
that the edges fit around the back panel.
3.
4.
5.
Secure the cover by replacing the screws on the
back of the main unit.
You can return the computer to its original
position now and reconnect it to the monitor, the
keyboard, and any other peripherals you have.
Check to make sure the power switch is off before
you reconnect the power cable to the back of the
main unit and then to an electrical outlet.
Installing Option Cards
5-7