User's Manual

Connecting the Keyboard

It’s easy to connect the keyboard. Just insert the

keyboard connector into the KEYBOARD socket on

the back panel of your Apex. Be careful not to force

the connector, but make sure you insert it all the way

by pushing on it gently. Then check to see that the

cable is secure.

Now that your Apex is all hooked up, you can decide

if you’d like to adjust the angle of the keyboard by

lifting the legs on the bottom. Turn the keyboard over

and lift each leg upward until it locks into place. If this

feels better to you, fine; if not, just leave the legs flat.

1-14

Setting Up

Your System