User`s manual

Running the Setup Program

Setting Up System Configuration

lf you choose item 1 from the initial screen, you can set up the

following:

• date and time

• coprocessor

• base memory

• extended memory

• diskette drive

• fixed disk type

• display card

Preformatting Hard Disk

lf you want to preformat your hard disk(s), choose item 2. Before

starting your computer, make sure to set the correct parameters.

Consult your computer dealer if you are in doubt as to which rate to

choose.

Setting Up Utilities

If you choose item 3, you may enable or disable system utilities.

• The timer has two basic functions:

1. Current time can be turned off, set to display on the hour,

or set to display constantly.

2. An alarm can be set for each hour, half an hour, or turned

Off.

• If the calculator is enabled, you may press <Ctrl> <Alt> <5>

(on the numeric keypad) in the text mode to start the cal-

culator.

Chapter 3: Operating Your System