User`s manual

Step 1: Fastening Disk Drives

5.25” Floppy/Hard Disk Drives:

To install a 5.25” floppy or hard disk drive, follow the procedures below.

•

Screw the metal guides to the disk drive as shown below.

Figure 6-1: Screwing a 5.25" Disk Drive

•

Slide the back end of the disk drive first into the disk drive

bay.

•

Screw the disk drive to the disk drive bay as shown below.

Figure 6-2: Fastening 5.25” Disk Drives

Chapter 6: Appendix