User`s manual

1. Setting Up System Configuration

If you choose item 1 from the screen on the previous page to configure

your system, the following will appear:

ROM SETUP PROGRAM VERSION 2.0

CHOOSE ITEM NUMBER : [l]

-------------------------------------------------------------

›œ ›œ

:CHANGE ITEM

•ž •ž

:MODIFY

8 8

:ACCEPT

SET UP SYSTEM CONFIGURATION

1. CURRENT DATE : [04-26-1990]

2. CURRENT TIME : [05:30:00]

3. COPROCESSOR : [

1 ]

4. BASE MEMORY :[ 640 KB ]

5. EXTENDED MEMORY : [ 1280 KB ]

6. DISKETTE DRIVE A : [ 1.2 M ]

DISKETTE DRIVE B : [ NO

]

7. FIXED DISK TYPE C : [ 40 / MFM ]

FIXED DISK TYPE D : [ NO / NONE ]

8. PRIMARY DISPLAY CARD : [

MGA ]

9. EXIT

Figure 3-2: “Set Up System Configuration

”

Screen

Once you have entered all appropriate information and exited by

choosing item 9, you will be asked to confirm that the configuration

data are correct.

If at a later date you alter the configuration of your system, you will

need to go through the program again and make the appropriate

changes.

Chapter 3: Operating Your System 15