User`s manual

1-7 Control Panel
The control panel provides several useful functions which are ex-
plained below. You are likely to use the front panel frequently, so let’s
start there.
Figure 1-4: Front Panel
Reset Button
The reset button allows you to restart the system without turning the
power off.
If you encounter any problems while using unfamiliar software, you can
always restart quickly from the RAM test stage by pressing the reset
button. Note, however, that any data which have not been saved to
disk will be lost.
Turbo Button
The Turbo button allows you to change the running speed of the
microprocessor to accommodate software requirements.
Some
software applications must be run at a slow clock speed.
Indicator Lights
Two lights indicate the operation status of your computer. The green
LED is lit when the power is on. The red LED comes on when the hard
disk is being accessed.
8
Chapter 1: System Overview