User`s manual

A screen like the following will appear.

DTK NEAT EMS hardware configuration setup.

Select the option you want for each item

0: 208H/209H

1: 218H/219H

2: 258H/259H

3: 2688/269H

4: 2A8H/2A9H

5: 2B8H/2B9H

6: 2E8H/2E9H

FRAME START ADDRESS:4

Fl:accept,Esc,

› œ› œ

Indicate two parameters for EMS-page register I/O base address and

frame start address.

•

Choose the correct configuration as you desire, then press

<F1> to complete setup.

You will get a warning if you give an incorrect response. For example,

if you give D000H as your frame start segment, and shadow RAM in

the same area, the following message will appear.

DTK NEAT EMS hardware configuration setup.

Select the option you want for each item

PAGE REGISTER I/O : 0

BASE ADDRESS

Fl:accept,Esc,

› œ› œ

0: C000H, C400H, C800H, CC00H

1: C400H, C800H, CC00H, D000H

2: C800H, CC00H, D000H, D400H

3: CC00H, D000H, D400H, D800H

4: D000H, D400H, D800H, DC00H

5: D400H, D800H, DC00H, E000H

6: D800H, DC00H, E000H, E400H

7: DC00H, E000H, E400H, E800H

8: E000H, E400H, E800H, EC00H

Chapter 6: Appendix