Supplemental Information

ManualsBrandsEpson ManualsProjectorsEpson AP-60 Projector Sound Solution

AP-60 Product Update

Battery Update

The AP-60 pendant microphone includes rechargeable batteries and a charger. The rechargeable batteries

replace the LR6 (alkaline) batteries mentioned in the Installation Guide and User’s Guide. For best results, be

sure to use the rechargeable batteries in the pendant microphone. Refer to the instructions included with the

rechargeable batteries and charger for usage information.

Recommended Ceiling Plate Kits

The AP-60 is designed to work with the following Epson ceiling plate kits:

• ELPMBP01 (adjustable suspended ceiling channel kit)

• ELPMBP02 (false ceiling plate kit)

Refer to the ceiling plate kit manual for installation instructions.

Reducing Microphone Feedback

Try the following solutions to reduce microphone feedback (howling):

• Move the microphone at least three to four feet away from the AP-60 speakers.

• Adjust the

Gain wheel on the pendant microphone until the white line is next to Up, but still

visible. Adjust the

Microphone and Line gain control knobs on the AP-60 audio control panel

to the 12 o’clock position (approximately 50%). Then adjust the AP-60 master volume using the

remote control until you achieve the desired volume.

Note

If necessary, the Microphone gain control knobs can be adjusted to the 1 o’clock

position, and the Line gain control knobs can be set to the 2 o’clock position. Using a

higher microphone gain setting will increase the chance of microphone feedback.

• If you’re still experiencing feedback after trying the solutions above, turn on

the AP-60 Anti-Feedback feature (see below).

Using the AP-60 Anti-Feedback Feature

Follow the steps in the Installation Guide to remove the audio control panel from the AP-60.

1 Set the

ANTFD switch on the back of the audio control panel to one of the following positions:

•

LOW: Use this setting if the gain and volume settings are set properly and microphone feedback occurs

occasionally.

•

HIGH: Use this setting if the gain and volume settings are set properly and microphone feedback occurs

frequently. Using this setting with a Line gain set to the 3 o’clock position or higher may reduce sound

quality.

2 Follow the steps in the Installation Guide to reinstall the audio control panel.

Environmental Specifications

Temperature Operating: 32 to 104 °F (0 to 40 °C)

Storage: 32 to 140 °F (0 to 60 °C)

CPD-27965R1

Printed in XXXXXX

12:00

2:001:00

Microphone gain Line gain

Summary of content (5 pages)

PAGE 1
AP-60 Product Update Battery Update The AP-60 pendant microphone includes rechargeable batteries and a charger. The rechargeable batteries replace the LR6 (alkaline) batteries mentioned in the Installation Guide and User’s Guide. For best results, be sure to use the rechargeable batteries in the pendant microphone. Refer to the instructions included with the rechargeable batteries and charger for usage information.
PAGE 2
Pendant Microphone Attach the Neck Strap Contacting Customer Support 1. Disconnect both ends of the pendant microphone’s neck strap. 2. Attach the ends of the neck strap to the pendant microphone. 3. Reconnect the ends of the neck strap. Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download product documentation, view FAQs, or e-mail Epson with your questions.
PAGE 3
Warranty FCC Compliance Statement 1-Year Limited Warranty for Wireless Audio Accessory Product What Is Covered: Epson America, Inc. (“Epson”) warrants to the first retail purchaser that the product enclosed with this limited warranty statement, if purchased new and operated in the United States or Canada, will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase. For warranty service, you must provide proof of the date of original purchase.
PAGE 4
Microphone à bretelle Attachez la bretelle Assistance technique 1. Déconnectez les deux extrémités de la bretelle du microphone. 2. Fixez les extrémités de la bretelle sur le microphone. 3. Reconnectez les extrémités de la bretelle. Assistance Internet Visitez notre site Web de soutien à epson.ca/support et sélectionnez votre produit pour des solutions à des problèmes courants.
PAGE 5
Garantie Garantie de un an sur les accessoires audio sans fil Ce qui est couvert : Epson America, Inc. (« Epson ») garantit à l’acheteur d’origine au détail que le produit couvert par la présente garantie limitée, s’il est acheté neuf et utilisé aux États-Unis ou au Canada, sera exempt de défaut de fabrication et de vice de matériau pendant une période de un (1) an à compter de la date d’achat d’origine.