Installation Guide

5 Check the battery label and insert the included LR6 (alkaline) AA batteries into the pendant microphone.

6 Close the pendant microphone’s battery cover.

Adjust the Sound

Before adjusting the audio levels, make sure that you have connected your audio equipment to the AP-60. Then

follow the steps in this sections to adjust the audio levels.

1 Press the

P power button on the AP-60 remote control to turn on the system. The P power light on the

AP-60 turns green.

2 Adjust the

Microphone 1, Microphone 2, Line 1, and Line 2 gain control knobs to the far left setting to

turn the gains all the way down.

3 Make sure that all of your audio sources are connected and turned on.

Press to turn on

Gain control knobs