user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Basic Specifications 31
1.2.8 Compliance with Standards and Regulations
Safety Standards
Safety Standards (Laser Radiation)
Note : <Only for Information>
Laser power (max.): 15 mW
Wave length (average): 785 nm
Max. Average Radiation Power at laser aperture: 36.903
µW
Power on the OPC drum (max.): 1.044
µW
EMC
Electrical Harmonic Component
Complies with harmonic suppression guideline (JBMA)
EN61000-3-2 Class A(2000)
Electrical Power Consumption
Conforms to International Energy Star Program standards
Others
Toner: Conforms to OSHA, TSCA, and EINECS
(No materials hazardous to human health)
OPC: Conforms to OSHA
(No materials hazardous to human health)
Ozone generation: Blue Angel mark compliant
Materials: The materials do not contain any substances use of
which is prohibited by laws of the market countries,
and the contents of hazardous substances do not exceed
their respective allowable levels.
Table 1-31. Safety Standards
Model Name Applicable Standards
100V IEC60950 (1998) compliant
110V-120V
UL60950 3
rd
(2000)
CSA-C22.2 No.60950-00 3
rd
IEC60950 3
rd
(1999) + Country’s Differences in CB Bulletin
220V-240V
IEC60950 3
rd
(1999) + Country’s Differences in CB Bulletin
EN60950 (2000) + Annex ZB, ZC
GB4943-1995
Table 1-32. Safety Standards (Laser Radiation)
Model Name Applicable Standards
100V JIS C 6802+A1 (1998) compliant
110V-120V
FDA21CFR Chapter 1 Subchapter J, Part1040
IEC 60825-1+A1, 2 (2001)
220V-240V
EN 60825-1+A11, A2 (2001)
IEC 60825-1+A1, 2 (2001)
Table 1-33.
Model Name Applicable Standards
100V VCCI Class B
110V-120V
FCC (47CFR) Part15 Subpart B Class B
ICES-003: Issue3 class B (C108.8-M1983)
For 200 V system models
EN 550222(1998) Class B
EN 61000-3-3+A1(2001) (Flicker)
EN 55024(1998) (Immunity)
CISPR 22 Class B
GB9254(1998) Class B
GB17625. 1-1998 Class A