Users Manual

Wuxi Weida Intelligent Electronics Co., Ltd.

金鑰配對成功後，直到下次按鍵時才能發送配對廣播。

4）Pairing method:

a) Press and hold the “ENTER” + “VOL-” button for 3 seconds

at the same time, the indicator light flashes, and the pairing

success indicator light is on for 3 seconds and then off.

b) When the pairing is not successful, if you still press the

ENTER +VOL- button, the pairing broadcast will be sent all

the time so that the user can pair.

c) Press the ENTER +VOL- button once to match successfully. Do

not clear the pairing and then pair again. After a key pairing

is successful, the pairing broadcast can no longer be sent

until the next time the button is pressed.

連接間隔＜12ms

Connection interval＜12ms

5）遙控距離：≥10m

5）Remote control distance：≥10m

6）藍牙設備名稱：EPSON ATV REMOTE

6）Bluetooth device name:EPSON ATV REMOTE

7）支持“ENTER”+“返回”上傳 bug 報告功能

7）Support " ENTER " + "back" to upload bug report function

8）“返回”+“向下”打開附件頁面

8）"back" + "down" to open the Accessory page

2.遙控器其他要求

1). 配對功能要求：不得存在掃描不到藍牙設備或配對不上（包括短時間內連續按配對

鍵）的問題，請驗證 50 次確保無問題；

1). Pairing function requirements: there must be no problems that the Bluetooth device

cannot be scanned or paired (including continuous pressing of the pairing key within a

short period of time), please verify 50 times to ensure that there is no problem;

2). 回連功能要求:不得存在回連不上的問題，包括盒子斷電回連，遙控器斷電回連，靜