Safety Instructions
Perú Paraguay
Modelo: ELPWT01
Marca: EPSON
ID de FCC: BKMAE-WLPWT01
Fabricante del producto: Seiko Epson Corporation
Dirección: 3-3-5 Owa Suwa-shi, Nagano-Ken 392-8502,
Japón
Importado por:
Fastrax, S.A.
Av. Peru esq. Rio de Janeiro, Barrios Las
Mercedes, Asuncion, Paraguay Sol Control
S.R.L.
Av. Gral. Bernardino Caballero 810 esq. Celsa
Speratti, Asuncion, Paraguay
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.
Para maiores informações, consulte o site da ANATEL em www.anatel.gov.br.
U.S. / Canada
FCC ID: BKMAE-ELPWT01
IC: 1052D-ELPWT01
Operating frequency range:
2.412-2.462GHz (11b/g/n) 5.18-5.24GHz, 5.745-
5.825GHz (11a/ac)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure
rules.
The grantee is not responsible for any changes or modications not expressly approved by the party
responsible for compliance. Such modications could void the user’s authority to operate the equipment.
Data transmission is always initiated by software, which is the passed down through the MAC, through the
digital and analog baseband, and nally to the RF chip. Several special packets are initiated by the MAC. These
are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns o at the
end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being
transmitted. In other words, this device automatically discontinue transmission in case of either absence of
information to transmit or operational failure.
CAN ICES-3(B) / NMB-3(B)
Le present appareil est conforme a la partie 15 des regles de la FCC et aux normes des CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Cet equipement est conforme aux limites d’exposition aux rayonnements enoncees pour un environnement
non controle et respecte les regles les radioelectriques (RF) de la FCC lignes directrices d’exposition et
d’exposition aux frequences radioelectriques (RF) CNR-102 de l’IC.
La transmission des donnees est toujours initiee par le logiciel, puis les donnees sont transmises par
l’intermediaire du MAC, par la bande de base numerique et analogique et, enn, a la puce RF. Plusieurs paquets
speciaux sont inities par le MAC. Ce sont les seuls moyens pour qu’une partie de la bande de base numerique
active l’emetteur RF, puis desactive celui-ci a la n du paquet. En consequence, l’emetteur reste uniquement
active lors de la transmission d’un des paquets susmentionnes. En d’autres termes, ce dispositif interrompt
automatiquement toute transmission en cas d’absence d’information a transmettre ou de defaillance.
Korea
R-C-EKL-EER-xxxxxxx
기기의명칭/모델명: xxxxxxxxx / xxxxxxxx
인증받은 자의 상호: 한국엡손(주)
제조자/제조국가: xxxxxxxxxxxxxx
해당 무선설비가 전파혼신 가능성이 있으므로 인명안전과관련된 서비스는 할 수 없음.
Operating frequency &
power.
2412 - 2472 MHz: 0.01W/MHz
2422 - 2462 MHz: 0.005W/MHz
5180 - 5240 MHz: 0.01W/MHz
5190 - 5240 MHz: 0.005W/MHz
5230, 5240, 5210 - 5240 MHz: 0.0025 W/MHz
Modulation Type DSSS, OFDM, FHSS, BPSK, QPSK, 16QAM, 64QAM, 256QAM, FHSS
수입원:한국엡손(주) TEL.1566-3515
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are
safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if
the product can be kept as far as possible from the user body or set the device to lower output power if such
function is available. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/
CANADA. This equipment should be installed and operated with minimum distance 5 mm between the
radiator & your body. The maximum measured SAR value is 0.65 W/kg.
Caution:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment
and are safe for intended operation as described in this manual. The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user body or set the device to lower output
power if such function is available. This equipment should be installed and operated with minimum distance 5
mm between the radiator & your body. The maximum measured SAR value is 0.65 W/kg.
Avertissement:
les dispositifs fonctionnant dans la bande de 5150 à 5250MHz sont réservés uniquement pour une utilisation à
l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux;
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le
Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que
décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé
aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus
faible si une telle fonction est disponible.
Cet équipement doit être installé et utilisé avec un minimum de 5 mm de distance entre le radiateur et votre
corps. La valeur SAR maximale mesurée est de 0,65 W / kg
-802.11:b/g/n20/n40 (2400MHz~2483.5MHz)
-802.11a/n20/n40/ac20/ac40/ac80: (5150MHz ~ 5250MHz) and (5725MHz~5850MHz)