Installation Guide

11 of 11
Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112
ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14
Cable Management
To make an opening to route cables through
projector mount assembly, adjust projector mount
assembly to full upward tilt position and maximum
left or right roll position by turning knobs for
adjustments as shown in step 5.
Route cables through top of extension column as
shown.
NOTE: A method for assisting cables through
extension column may be required (example: string
tied to connector to help pull through extension
column).
Route cables through projector mount assembly as
shown and connect to projector.
MAXIMUM
WIDTH
1-9/16"
(40 mm)
HEIGHT DIMENSION
WILL VARY DEPENDING
ON WIDTH DIMENSION
DO NOT
CRIMP
WIRES
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
MAXIMUM DIMENSIONS
EXTENSION COLUMN
WILL ALLOW
ROUTE
CONNECTOR
THROUGH
FIRST
g. 6.1
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
6