Installation Guide
10 of 11
Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112
ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14
To adjust yaw (swivel) for extension column installation: Loosen screw on projector mount assembly (A)
indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw.
To adjust pitch (forward and backward tilt): Turn knob on back of mount as shown below. Pull knob out and turn
by hand for easy adjustment.
To adjust roll (side to side tilt): Turn knob on side of mount as shown below. Pull knob out and turn by hand for
easy adjustment.
5
Projector Alignment
+/- 10°
3/8"
(10mm)
Loosen screw, make adjustment, retighten screw.
4mm wrench
+15°
-20°
+/- 5°
4mm wrench
4mm wrench
Loosen screw, make adjustment, retighten screw.
Loosen screw, make adjustment, retighten screw.