Operating instructions

5. SPEL AOI Reference
EPSON RC+ 7.0 Option AOI (Add-On Instructions) Rev.1 41
SPEL_Lefty
Description
Sets the hand orientation of the specified point to Lefty.
Common Inputs and Outputs
Refer to section 2.4 SPEL AOI Common Inputs and Outputs.
Inputs
Point INT desired point number.
Operation
Refer to section 2.5 SPEL AOI General Operation.
Refer to Hand Statement in the SPEL+ Language Reference manual.
Example
To change P2’s hand orientation to Lefty, enter values and run the AOI as shown below.