Operating instructions

5. SPEL AOI Reference
EPSON RC+ 7.0 Option AOI (Add-On Instructions) Rev.1 15
SPEL_Accel
Description
Sets the point to point acceleration and deceleration. Specifies the ratio (%) of the maximum
acceleration/deceleration using an integer equals to or greater than 1.
Common inputs and Outputs
Refer to section 2.4 SPEL AOI Common Inputs and Outputs.
Inputs
Accel INT value of acceleration as percentage.
Decel INT value of deceleration as percentage.
Operation
Refer to section 2.5 SPEL AOI General Operation.
Refer to Accel Statement in the SPEL+ Language Reference manual.
Example
To set acceleration to 50% and deceleration to 50%, set [Accel] to “50” and [Decel] to “50”, as shown below.