Operating instructions

4. Creating a PLC Project using SPEL AOIs
6
EPSON RC+ 7.0 Option AOI (Add-On Instructions) Rev.1
Importing the Ethernet configuration
1. Right click on [A1, Ethernet], then click [Import Module].
2. Navigate to \EpsonRC70\Fieldbus\EtherNetIP\AOI and select the file
EpsonEtherNetIP.L5X.
3. After import, right-click on the module and select Properties. Change the default IP
address to be the address of the robot controller's EtherNetIP slave board.
Manual Ethernet configuration
1. Right click on [A1, Ethernet], then click [New Module].