User`s guide

Scanning in Professional Mode using the document table
1. Place your original(s) on the document table. See “Setting Your Originals” on page 47 for
instructions.
2. Start Epson Scan. See “Starting Epson Scan” on page 68 for instructions.
3. Select Professional Mode in the Mode list. See “Changing the scan mode” on page 69 for
instructions.
4. Click the arrow to open the Document Type list and select Reflective.
5. Click the arrow to open the Document Source list and select Document Table.
6. Click the arrow to open the Auto Exposure Type list and select Document or Photo.
7. Click the arrow to open the Image Type list and select the detailed image type you are scanning.
Image Type setting Type of image you are scanning
24-bit Color Color photos
Color Smoothing Color graphics, such as a chart or graph
8-bit Grayscale Black-and-white photos with just a few shades of gray
Black & White Documents with black text and/or line art
Note:
If you select 8-bit Grayscale or Black & White, you can also select an Image Option setting, as
described below.
Image Option Setting Description
None No Image Option setting is applied.
Dropout: Red Dropouts red in the scan.
Dropout: Green Dropouts green in the scan.
Dropout: Blue Dropouts blue in the scan.
Color Enhance: Red Enhances red in the scan.
Color Enhance: Green Enhances green in the scan.
Color Enhance: Blue Enhances blue in the scan.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 76
Downloaded from ManualsPrinter.com Manuals