User`s guide

Item Settings (default in bold)
Code Page
437, 850, 858, 860, 863, 865
T. Margin
0.30 ... 0.40 ...1.50inch in 0.05-inch increments
Text
1 ... 67 ... 117Lines
Auto CR
Off, On
Auto LF
Off, On
Alt. Graphics
Off, On
Bit Image
Dark, Light
ZeroChar
0, (or the zero character with a slash)
CharacterSet
1, 2
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by different
languages. The printer prints text based on the selected character table.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the
Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to
the default for each paper size.
Auto CR
Epson AcuLaser M7000 Series User's Guide
Using the Control Panel 80