User’s Guide NPD4065-00 EN Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
EPSON AcuLaser M1200 Series User’s Guide Operating System Versions In this manual, the following abbreviations are used. Windows refers to Windows Vista, Vista x64, XP, XP x64, 2000. ❏ Windows Vista refers to Windows Vista Ultimate Edition, Windows Vista Home Premium Edition, Windows Vista Home Basic Edition, Windows Vista Enterprise Edition and Windows Vista Business Edition.
EPSON AcuLaser M1200 Series User’s Guide Contents Safety Instructions Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EPSON AcuLaser M1200 Series User’s Guide Printing on Special Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Envelopes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EPSON AcuLaser M1200 Series User’s Guide Setting Monitoring Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Status Alert window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Changing the Printer Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 For Mac OS X 10.5 users.
EPSON AcuLaser M1200 Series User’s Guide Transporting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Chapter 8 Troubleshooting Ready and Error Lights (AcuLaser M1200/EPL-6200L). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Indicator lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EPSON AcuLaser M1200 Series User’s Guide Photoconductor unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Appendix B Working with Fonts EPSON BarCode Fonts (Windows only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 System requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EPSON AcuLaser M1200 Series User’s Guide Safety Instructions Warnings, Cautions, and Notes w Warnings must be followed carefully to avoid bodily injury. c Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer. Safety Precautions Be sure to follow these precautions carefully to ensure safe, efficient operation: Note: The illustrations used in this section show the EPL-6200.
EPSON AcuLaser M1200 Series User’s Guide ❏ Never force the printer’s components into place. Although the printer is designed to be sturdy, rough handling can damage it. ❏ When removing the developer cartridge, never touch the developing roller under the flap; otherwise, print quality will decline. ❏ When handling the developer cartridge, always place it on a clean, smooth surface. ❏ Do not turn the developer cartridge upside down or stand it on its ends.
EPSON AcuLaser M1200 Series User’s Guide ❏ Be careful not to scratch the surface of the drum. When you remove the photoconductor unit from the printer, always place the unit on a clean, smooth surface. Avoid touching the drum, since oils from your skin can permanently damage its surface and affect print quality. ❏ To get the best print quality, do not store the photoconductor unit in an area subject to direct sunlight, dust, salt air, or corrosive gases (such as ammonia).
EPSON AcuLaser M1200 Series User’s Guide ❏ Connect your printer to an electrical outlet that meets the power requirements of this printer. Your printer’s power requirements are indicated on a label attached to the printer. If you are not sure of the power supply specifications in your area, contact your local power company or consult your dealer. ❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
EPSON AcuLaser M1200 Series User’s Guide ❏ Unplug this printer from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into it. C. If it has been exposed to rain or water. D. If it does not operate normally when the operating instructions are followed.
EPSON AcuLaser M1200 Series User’s Guide Laser safety labels w Warning: The performance of procedures and adjustments other than those specified in this guide may result in hazardous radiation exposure. Your printer is a Class 1 laser product as defined in the IEC 60825-1:2001 specifications. The label shown on the right is attached to the back of the printer in countries where required. Internal laser radiation Max. Average Radiation Power 36.
EPSON AcuLaser M1200 Series User’s Guide Minimize the risk To minimize the risk of exposure to ozone, you should avoid the following conditions: ❏ Use of multiple laser printers in a confined area ❏ Operation in conditions of extremely low humidity ❏ Poor room ventilation ❏ Long, continuous printing together with any of the above Printer location The printer should be located so that the exhaust gases and heat generated are: ❏ Not blown directly into the user’s face ❏ Vented directly out of the building
EPSON AcuLaser M1200 Series User’s Guide Chapter 1 Product Information Printer Parts Front view EPL-6200 b a c d g e f Product Information Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200/EPL-6200L b a c d g e a. Output cover b. Output tray c. Control panel d. Front cover e. MP (Multi-Purpose) tray f. Manual feed slot (EPL-6200 only) g. Power switch Rear view EPL-6200 a g e d b c Product Information Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide EPL-6200 Network model a g f d b c AcuLaser M1200/EPL-6200L a b d a. AC inlet b. USB interface connector c. Duplex Unit connector (EPL-6200 only) d. Parallel interface connector e. Type B interface slot (EPL-6200 only) f. Ethernet interface connector (EPL-6200 Network model only) g. Right side cover (EPL-6200 only) Control Panel The EPL-6200 has six indicator lights and three buttons, while the AcuLaser M1200/EPL-6200L comes with two indicator lights.
EPSON AcuLaser M1200 Series User’s Guide Indicator lights EPL-6200 a b c d f e AcuLaser M1200/EPL-6200L d e a Memory Usually turns on or flashes in combination with other lights to indicate a memory-related error or warning. b Toner On when the printer’s developer cartridge has run out of toner. Flashes to indicate that toner is running low. If this light is flashing, have a new developer cartridge ready.
EPSON AcuLaser M1200 Series f Data User’s Guide On when data is received and stored in the print buffer (the section of memory reserved for receiving data) but not yet printed. Flashing indicates that the printer is processing data. When no data remains in the print buffer, this light is off. Consumable Products To purchase consumable products, contact your dealer or a qualified service representative in your area.
EPSON AcuLaser M1200 Series User’s Guide Printing multiple pages on a sheet Using the Print Layout setting, you can specify to print either two or four pages of a document onto a single sheet of paper. You can also specify the printing order, and select whether to print a frame around the pages. Each page is automatically resized to fit the specified number of pages onto the selected paper size. Watermark printing Your printer comes with a list of predefined watermarks that you can add to your documents.
EPSON AcuLaser M1200 Series User’s Guide Chapter 2 Paper Handling Paper Sources This section describes the combinations of paper sources and paper types that you can use. MP tray Paper Type Capacity Paper Size Plain paper EPL-6200 Up to 250 sheets of 75 g/m2 paper (Weight: 60 to 90 g/m2, 16 to 24 lb) A4, A5, B5, Letter (LT), Legal (LGL), F4, Half-Letter (HLT), Executive (EXE), ISO-B5 (IB5) Government Letter (GLT), Government Legal (GLG), Custom-size paper: 76.2 × 127.0 mm (3.0 × 5.0 in.
EPSON AcuLaser M1200 Series User’s Guide ❏ The printer is extremely sensitive to moisture. Be sure to store your paper in a dry environment. ❏ The use of colored paper is acceptable, but coated paper should be avoided. ❏ You may use paper with preprinted letterheads, provided that the paper and ink are both laser-printer compatible. MP tray The MP tray is the standard paper source for this product.
EPSON AcuLaser M1200 Series User’s Guide Note: Lift the paper guide slightly to move it. 3. Fan a stack of paper and tap it on a flat surface to even the edges, and set the paper into the MP tray with the printable surface facing up. Then adjust the paper guide to the size of the paper. Note: ❏ Make sure to load the paper as far as it will go inside the MP tray. ❏ Make sure that you do not load paper beyond the limit mark. Paper Handling Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 4. Raise the output tray. Note: ❏ Before printing, make sure that the Paper Size setting in your printer driver matches the paper you load. ❏ If you want to print on paper heavier than 90 g/m2 (24 lb) or on special paper (such as envelopes, labels, transparencies, or thick paper), see “Printing on Special Media” on page 25. Loading a custom paper size You can load any custom paper size into the MP tray as long as it is within 76.2 × 127.0 mm (3.0 × 5.0 in.
EPSON AcuLaser M1200 Series User’s Guide This product can print on special paper stock such as labels, envelopes, thick paper, and transparencies. Labels You can load up to 10 sheets of labels into the MP tray. However, you may need to feed some types of labels one sheet at a time. To prevent the adhesive from coming into contact with printer parts, always use labels that completely cover the backing sheet such that no gaps occur between the individual labels.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200/EPL-6200L To print on envelopes, choose Thick Narrow from the Paper Type drop-down list in the printer driver. The print quality on envelopes may be irregular because different parts of an envelope have different thicknesses. Print one or two envelopes to check the print quality. If the printing is too light, adjust the print density as described in “Print Quality Problems” on page 105.
EPSON AcuLaser M1200 Series User’s Guide When printing on transparencies, make sure to choose Transparency from the Paper Type drop-down list in the printer driver. Paper Handling Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide Chapter 3 Using the Printer Driver For Windows About the Printer Software The printer driver lets you choose from a wide variety of settings to get the best results from your printer, while the EPSON Status Monitor 3 lets you check the status of your printer. The printer driver is included in the CD-ROM that shipped with your printer. For instructions on installing the printer driver, see the Setup Guide.
EPSON AcuLaser M1200 Series User’s Guide Note for Windows Vista users: Do not press the power button or put your computer to standby or hibernate mode manually during printing. Accessing the printer driver You can access the printer driver from any application program, or directly from your Windows operating system.
EPSON AcuLaser M1200 Series User’s Guide 2. Select the Zoom Options check box. 3. Select the desired paper size from the Output Paper drop-down list. The page will be printed to fit on the paper you have selected. 4. Select Upper Left for Location to print the enlarged or reduced page image at the upper left corner of the paper. Select Center to print the enlarged or reduced page image with centering. 5. Click OK to accept the settings. To resize pages by a specified percentage 1. Click the Layout tab.
EPSON AcuLaser M1200 Series User’s Guide 3. Select the Zoom To check box. 4. Specify the magnification percentage in the box, then click OK. The percentage can be set between 50% and 200% in 1% increments. If necessary, select the paper size to be printed from the Output Paper drop-down list. Modifying the print layout “Layout printing” prints either 2 or 4 pages onto a single page and specifies the printing order, automatically resizing each page to fit the specified paper size.
EPSON AcuLaser M1200 Series User’s Guide 2. Select the Print Layout check box, and click Print Layout Settings. The Print Layout Settings dialog box appears. 3. Select the number of pages you want to print on one sheet of paper. 4. Select the Page Order in which the pages are printed on each sheet. Note: The Page Order choices depend on the Pages selected above, and the paper orientation (Portrait or Landscape) selected on the Basic Settings menu. 5.
EPSON AcuLaser M1200 Series User’s Guide Using watermarks Follow the steps to use a watermark on your document. In the Watermark dialog box, you can select from a list of predefined watermarks, or you can select a bitmap (.BMP) or text (.TXT) file as your own custom watermark. The Watermark dialog box also allows you to make a variety of detailed watermark settings. For example, you can select the size, intensity, and position of your watermark. 1. Click the Special tab. 2. Select the Watermark check box.
EPSON AcuLaser M1200 Series User’s Guide 4. Select a watermark from the Watermark Name drop-down list. 5. Select the location on the page where you want to print the watermark from the Location list box. 6. Adjust the horizontal or vertical Offset position. 7. Adjust the image intensity of the watermark with the Intensity slider bar. 8. Adjust the size of the watermark with the Size slider bar. 9.
EPSON AcuLaser M1200 Series User’s Guide 6. If you select Text, type the watermark text in the Text box. If you select BMP, click Browse, and select the BMP file you want to use, then click OK. Note: Before making a custom watermark, you should prepare a bitmap (.bmp) file. 7. Click Save to close the User Defined Watermarks dialog box. Your watermark will appear in the list box. 8. Click OK to register the new watermark settings. Note: You can register up to 10 watermarks.
EPSON AcuLaser M1200 Series User’s Guide Avoiding Insufficient Memory Error (AcuLaser M1200/EPL-6200L) When you print graphics or a large amount of data, the printer may stop due to insufficient memory. Follow the steps below to avoid memory errors and continue printing. Note: Print quality will decrease when you use this function. 1. Click the Optional Settings tab. 2. Click Extended Settings. The following dialog box appears. 3. Select the Avoid Insufficient Memory Error check box. 4.
EPSON AcuLaser M1200 Series User’s Guide Accessing the EPSON Status Monitor 3 You can access the EPSON Status Monitor 3 from any application program, or from your Windows operating system. ❏ The EPSON Status Monitor 3 appears automatically when an error occurs. ❏ To access the EPSON Status Monitor 3 from your application, click the Print or Page Setup command on the File menu, click Properties and then click the Utility tab, and click the EPSON Status Monitor 3 icon to start the EPSON Status Monitor 3.
EPSON AcuLaser M1200 Series User’s Guide Getting printer status details You can monitor printer status and obtain information on consumable products using the EPSON Status Monitor 3 dialog box. AcuLaser M1200 1 Icon/Message Shows the printer status. 2 Printer image The image at the upper left shows the printer status graphically. 3 Text box The text box next to the printer image displays the current status of the printer. When a problem occurs, the most probable solution is displayed.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200/EPL-6200L The following settings and buttons appear in the dialog box: 1 Select Notification Use the check boxes in this area to select the types of error that you wish to be notified about. Note: You can choose Once a day for consumable. Once a day: When a notification occurs, it is displayed once a day until it is resolved. 2 Default button Restores default settings.
EPSON AcuLaser M1200 Series 5 More Settings button User’s Guide Allows to you change more settings. Note: If you change the settings, they are applied to all printers that have the same user interface. 6 OK button Saves new changes. 7 Cancel button Cancels any changes. 8 Help button Opens online help for the Monitoring Preferences dialog box. Note for Windows Vista users: When Allow monitoring of the shared printers check box is selected, the User Account Control dialogbox will appear.
EPSON AcuLaser M1200 Series 5 Do not display this window automatically check box User’s Guide When this check box is selected, the Order Online window appears automatically only when a replacement part first becomes low or reaches end of service life. More Settings (AcuLaser M1200/EPL-6200L) You can monitor over routers or use the SMB protocol for communication to monitor Windows shared printers. 1 Use SMB for communication You can monitor using both Winsock1.
EPSON AcuLaser M1200 Series User’s Guide If you wish to see information about printer consumables, click Consumables. Once this button is clicked, the Status Alert window will not disappear even after a problem is cleared. To close the box, you need to click Close.
EPSON AcuLaser M1200 Series User’s Guide For Windows Vista, XP, and 2000, select the USBXXX USB port in the list on the Ports tab. Note: This screen may vary depending on your operating system version. 4. Click OK to save the settings. Canceling Printing If the printouts are not what you expected and contain incorrect or garbled characters or images, you may need to cancel printing.
EPSON AcuLaser M1200 Series User’s Guide Double-click the printer icon on the task bar. Select the task in the list, then click Cancel from under the Document menu. After the last page is output, the Ready light on the printer turns on. The current job is canceled. Cancelling from the EPSON Status Monitor 3 window (AcuLaser M1200/EPL-6200L) You can cancel printing from EPSON Status Monitor 3. Note: EPSON Status Monitor 3 is automatically installed together with the printer driver.
EPSON AcuLaser M1200 Series User’s Guide Note for AcuLaser M1200 and EPL-6200L: The printer driver and EPSON Status Monitor 3 are installed simultaneously, and cannot be uninstalled separately. Not all the steps below are required for the uninstallation. 1. Quit all applications. 2. For Windows Vista, click Start, then click Control Panel. For Windows XP, click Start, click Control Panel, then double-click Add or Remove Programs. For Windows 2000, click Start, point to Settings, then click Control Panel.
EPSON AcuLaser M1200 Series User’s Guide 5. Click the Printer Model tab, and then select the printer icon. Note: If your printer is the AcuLaser M1200 or EPL-6200L, click OK, and proceed directly to step 8. 6. Click the Utility tab, and confirm that the EPSON Status Monitor 3 check box is selected. Note: Select the EPSON Status Monitor 3 check box only when you are uninstalling the EPSON Status Monitor 3 as well. 7.
EPSON AcuLaser M1200 Series User’s Guide Chapter 4 Using the Printer Driver For Macintosh About the Printer Software The printer driver lets you choose from a wide variety of settings to get the best results from your printer, while the EPSON Status Monitor 3 lets you check the status of your printer. The printer driver is included in the CD-ROM that shipped with your printer. For instructions on installing the printer driver, see the Setup Guide.
EPSON AcuLaser M1200 Series User’s Guide Mac OS X To access the printer driver, register your printer in Print & Fax (for Mac OS X 10.5), Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2), click Print on the File menu of any application, then select your printer. From an application ❏ To open the Paper Setting dialog box, select Page Setup from the File menu on any application. ❏ To open the Basic Settings tab, select Print from the File menu on any application.
EPSON AcuLaser M1200 Series User’s Guide Note: Print quality will decrease when you use this function. 1. Open the Extension Settings dialog box. 2. Select the Avoid Insufficient Memory Error check box. Printing watermarks (AcuLaser M1200 only) This function allows you to print a text-based or image-based watermark on your document. For Mac OS X 10.5 users 1. Open the print dialog box. 2. Select Printer Settings from the drop-down list and click the Stamp Function button. 3.
EPSON AcuLaser M1200 Series User’s Guide Making a new watermark (AcuLaser M1200 only) For Mac OS X 10.5 users 1. Open the print dialog box. 2. Select Printer Settings from the drop-down list and click the Stamp Function button. 3. Select the Watermark Settings tab, then select the Watermark check box. 4. Select Text or Image, then click . 5. If you select Text, type the watermark text, then select Font and Style. If you select Image, select an image file (PDF, PNG, or JPG), then click Open.
EPSON AcuLaser M1200 Series User’s Guide Printing headers and footers (AcuLaser M1200 only) This function allows you to print user name, computer name, date, time, or collate number, at the top or bottom of each page in a document. For Mac OS X 10.5 users 1. Open the print dialog box. 2. Select Printer Settings from the drop-down list and click the Stamp Function button. 3. Select the Header/Footer tab, then select the Header/Footer check box. 4. Select the items from the drop-down list.
EPSON AcuLaser M1200 Series User’s Guide Monitoring Your Printer with EPSON Status Monitor 3 About the EPSON Status Monitor 3 The EPSON Status Monitor 3 is a utility program that monitors your printer and gives you information about its current status. For example, you can find out the amount of the remaining service life of the developer cartridge through this utility. If a print error occurs, the utility provides you with a message describing the error.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200 1 Icon/Message Shows the printer status. 2 Printer image The image at the upper left shows the printer status graphically. 3 Text box The text box next to the printer image displays the current status of the printer. When a problem occurs, the most probable solution is displayed. 4 Close button Closes the dialog box. 5 Paper Displays the paper size. 6 Toner Indicates the remaining service life of the developer cartridge.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200 1 Monitor the printing status check box When this check box is selected, EPSON Status Monitor 3 monitors the printer status during a print job is processed. 2 Error Notification Selection Selects the types of errors that you wish to be notified about. Note: You can choose Once a day for consumable. Once a day: When a notification occurs, it is displayed once a day until it is resolved 3 Default button Restores default settings.
EPSON AcuLaser M1200 Series User’s Guide Changing the Printer Settings You can change the settings on the printer, such as paper source, paper type, and paper quality using EPSONRemotePanel. For Mac OS X 10.5 users 1. Open System Preferences, and click the Print & Fax icon. 2. Select your printer from the Printers list, and click Open Print Queue. 3. Press and hold the Option key, and click the Utility icon. 4. Select your printer in the EPSONRemotePanel dialog box. 5.
EPSON AcuLaser M1200 Series User’s Guide For Mac OS X users 1. Open the Applications folder on your hard drive, then open the Utilities folder and double-click the Print & Fax (for Mac OS X 10.5), Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2) icon. 2. Click Add Printer in the Printer List dialog box. 3. Select EPSON USB from the pop-up menu. Select your printer icon in the Product list, then click Add. 4. Close Print & Fax (for Mac OS X 10.
EPSON AcuLaser M1200 Series User’s Guide 2. Insert the printer software CD-ROM into your Macintosh. 3. Double-click the Mac OS X folder. 4. Double-click the Printer Driver folder. 5. Double-click your printer’s icon. Note: If the Authorization dialog box appears, enter the Password or phrase, and then click OK. 6. When the software license agreement screen appears, read the statement, and then click Accept. 7. Select Uninstall from the menu at the upper left, and then click Uninstall. 8.
EPSON AcuLaser M1200 Series User’s Guide Chapter 5 Setting Up Your Printer on a Network (AcuLaser M1200) For Windows Users Sharing the printer This section describes how to share the printer on a standard Windows network. The computers on a network can share a printer that is directly connected to one of them. The computer that is directly connected to the printer is the print server, and the other computers are the clients which need permission to share the printer with the print server.
EPSON AcuLaser M1200 Series User’s Guide Follow the steps below to set a Windows Vista, Vista x64, XP, XP x64, or 2000 as a print server, then install the additional drivers. Note: You must access Windows XP, XP x64, or 2000 as the Administrators of the local machine. 1. For a Windows Vista or Vista x64 print server, click Start, click Control Panel, then double-click Printers. For a Windows XP or XP x64 print server, click Start, point to Printers and Faxes.
EPSON AcuLaser M1200 Series User’s Guide For a Windows 2000 print server, select Shared as, then type the name in the Share Name box. 4. Select the additional drivers. Note: If the computers of the server and clients use the same OS, you do not have to install the additional drivers. Just click OK after step3. On the Windows XP, XP x64, or 2000 print server Click Additional Drivers. Select Windows being used for clients, then click OK.
EPSON AcuLaser M1200 Series Server Name Client OS Driver Windows XP x64* Windows XP or 2000 clients x86 Windows 2000, Windows XP and Windows Server 2003 Windows XP x64 clients x64 Windows XP and Windows Server 2003 Windows Vista, XP, or 2000 clients x86 Type 3 - User Mode Windows Vista x64 or XP x64 clients x64 Type 3 - User Mode Windows Vista or Vista x64 * User’s Guide The additional driver for Windows XP x64 can be used on Windows XP Service Pack2 or later.
EPSON AcuLaser M1200 Series User’s Guide Note: ❏ To share the printer on a Windows network, you need to set the print server. For details, see “Using an additional driver” on page 59. ❏ This section describes how to access the shared printer on a standard network system using the server (Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the administrator of the network for assistance.
EPSON AcuLaser M1200 Series User’s Guide 2. For Windows 2000, double-click the Add Printer icon, then click Next. For Windows XP or XP x64 click Add a printer in the Printer Tasks menu. For Windows Vista or Vista x64, click Add a printer in the menu bar. 3. For Windows 2000, select Network printer, then click Next. For Windows XP or XP x64, select A network printer, or a printer attached to another computer, then click Next.
EPSON AcuLaser M1200 Series User’s Guide For Windows XP or XP x64, select Browse for a printer. For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box that appears, then click Next. 5. For Windows XP, XP x64, or 2000, click the icon of the computer or server that is connected to the shared printer, and the name of the shared printer, then click Next.
EPSON AcuLaser M1200 Series User’s Guide Note: ❏ The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network. ❏ If the printer driver is installed in the client beforehand, you need to select either the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message.
EPSON AcuLaser M1200 Series User’s Guide ❏ If the additional drivers are installed or the computers of the server and clients use the same OS, you do not have to install the printer drivers from the CD-ROM. 1. Access the shared printer and a prompt may appear. Click OK, then follow the on-screen instructions to install the printer driver from the CD-ROM. 2. Insert the CD-ROM, type the appropriate drive and folder names in which the printer driver for clients is located, then click OK.
EPSON AcuLaser M1200 Series User’s Guide The computers on the network can share the printer that is directly connected to one of them. The computer that is directly connected to the printer is the print server, and the other computers are the clients which need permission to share the printer with the print server. The clients share the printer via the print server. For Mac OS X users Use the Printer Sharing setting, which is a standard feature of Mac OS X 10.2 or later.
EPSON AcuLaser M1200 Series User’s Guide Chapter 6 Replacing Consumable Products Precautions During Replacement Always observe the following handling precautions when replacing consumable products: ❏ Provide enough space for the replacement procedure. You will have to open some parts (such as the printer cover) of the printer when you are replacing consumables. ❏ Do not install used consumable products into the printer.
EPSON AcuLaser M1200 Series User’s Guide ❏ If you move a developer cartridge from a cool to a warm environment, wait for at least one hour before installing it to prevent damage from condensation. w Warning: ❏ Do not touch the toner in developer cartridges. Always keep toner away from your eyes. If toner gets on your skin or clothes, wash it off with soap and water immediately. ❏ Keep developer cartridges out of the reach of children.
EPSON AcuLaser M1200 Series User’s Guide 2. Open the front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull the cover towards you. c Caution: You must completely open the printer cover when replacing the developer cartridge; otherwise, you may damage the printer. 3. Hold the photoconductor unit’s casing by the handle and slowly pull it out of the printer. w Warning: Do not touch the fuser, which is marked CAUTION Hot Surface.
EPSON AcuLaser M1200 Series User’s Guide 4. Turn the release lever in the clockwise direction to release the developer cartridge, and then pull it out from the photoconductor unit’s casing. 5. Remove the new developer cartridge from its bag. While holding the cartridge horizontally, gently shake it a few times from side to side and then from front to back to distribute the toner evenly. 6. Remove the protective cover from the developer cartridge.
EPSON AcuLaser M1200 Series c User’s Guide Caution: Never touch the developing roller that is exposed after removing the protective cover; otherwise, print quality may decline. 7. Carefully insert the developer cartridge into the photoconductor unit’s casing until it clicks into place, making sure that the pins on both sides of the developer cartridge are aligned with the grooves on the casing. Replacing Consumable Products Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 8. Hold the photoconductor unit’s casing by its handle and insert it into the printer. Slide it gently into the opening until it locks into place. 9. Close the front cover until it clicks shut. Whenever you replace the developer cartridge, you should also clean the paper roller as described in “Cleaning the paper path rollers” on page 83.
EPSON AcuLaser M1200 Series User’s Guide ❏ To get the best print quality, do not store the photoconductor unit in an area subject to direct sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or rapid changes in temperature or humidity. ❏ Do not tilt the photoconductor unit. w Warning: ❏ Do not dispose of the used photoconductor units in fire, as it may explode and cause injury. Dispose of it according to local regulations.
EPSON AcuLaser M1200 Series User’s Guide 2. Open the front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull the cover towards you. c Caution: You must completely open the printer cover when replacing the photoconductor unit; otherwise, you may damage the printer. 3. Hold the photoconductor unit’s casing by the handle and pull it out of the printer. Replacing Consumable Products Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 4. Turn the release lever in the clockwise direction to release the developer cartridge, and then pull it out from the photoconductor unit’s casing. 5. Remove the new photoconductor unit from its bag. c Caution: Never touch the photoconductor unit’s light-sensitive drum. Otherwise, print quality may decline. Replacing Consumable Products Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 6. Carefully insert the developer cartridge into the new photoconductor unit’s casing until it clicks into place, making sure that the pins on both sides of the developer cartridge are aligned with the grooves on the casing. 7. Hold the photoconductor unit’s casing by its handle and insert it into the printer. Slide it gently into the opening until it locks into place. Replacing Consumable Products Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 8. Close the front cover until it clicks shut. You should reset the counter after replacing the photoconductor unit. The photoconductor counter for the EPL-6200 can be reset by using the buttons on the control panel or the printer driver, while that for the AcuLaser M1200/EPL-6200L can be reset only through the printer driver.
EPSON AcuLaser M1200 Series User’s Guide Chapter 7 Cleaning and Transporting the Printer Cleaning the Printer The printer needs only minimal cleaning. If you notice a decline in print quality, clean the inside of the printer as described in this section. You should also clean the MP tray and the printer case every few months. c Caution: Do not use any kind of combustible gases in or around the printer. Note: The illustrations used in this procedure show the EPL-6200.
EPSON AcuLaser M1200 Series User’s Guide 2. Open the printer’s front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull it towards you. 3. Remove the developer cartridge and the photoconductor unit by holding the photoconductor unit’s casing by the handle and pulling it out of the printer. 4. Remove any dirt inside the printer with a clean, dry, lint-free cloth. Do not use compressed air.
EPSON AcuLaser M1200 Series User’s Guide 5. Reinstall the developer cartridge and photoconductor unit. 6. Close the printer’s front cover until it clicks shut. 7. Open the printer’s output cover. 8. Gently wipe the exposed paper path area with a well-wrung cloth. Cleaning and Transporting the Printer Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 9. Close the output cover. 10. Remove all paper from the MP tray and clean the tray with a clean, dry, lint-free cloth. Cleaning the paper path rollers Paper is sometimes dusted with a powder to keep the image on one sheet from bleeding over to the back of the sheet stacked on top of it. When feeding such paper from the MP tray, the dust tends to get onto the paper rollers and eventually causes misfeeds to occur.
EPSON AcuLaser M1200 Series User’s Guide 2. Open the printer’s front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull it towards you. 3. Remove the developer cartridge and the photoconductor unit by holding the photoconductor unit’s casing by the handle and pulling it out of the printer. 4. Gently wipe the rubber part of the paper roller with a well-wrung cloth. Cleaning and Transporting the Printer Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 5. Reinstall the developer cartridge and photoconductor unit. 6. Close the printer’s front cover until it clicks shut. Removing spilled toner If toner spills inside the printer, do not use the printer until you remove all the spilled toner. If only a small amount of toner is present, carefully wipe out the inside of the printer with a clean, dry, lint-free cloth. If a large amount of toner is present, use a broom and dustpan to remove it.
EPSON AcuLaser M1200 Series User’s Guide 3. Disconnect all interface cables from the printer. 4. Remove all paper from the MP tray. 5. Remove or close the MP tray, depending on your printer model. EPL-6200 Grasp the base part of the MP tray with both hands, pull the bottom edge outward, and pull it out of the printer. AcuLaser M1200/EPL-6200L 6. Remove the optional 500-Sheet Lower Paper Cassette Unit A4 and/or Duplex Unit, if installed. (EPL-6200 only) 7.
EPSON AcuLaser M1200 Series c User’s Guide Caution: Do not expose the photoconductor unit and the developer cartridge to light any longer than necessary. Cleaning and Transporting the Printer Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide Chapter 8 Troubleshooting Ready and Error Lights (AcuLaser M1200/EPL-6200L) The Ready and Error lights on the top of the printer may be the first indication of trouble. The status of the lights, on, off or flashing, indicates your printer status, as described below. The Status Alert window in the EPSON Status Monitor 3 utility indicates what type of error has occurred and offers you a possible solution.
EPSON AcuLaser M1200 Series Status/Error/Warning User’s Guide INDICATOR LIGHTS Ready Error “Paper Out/Feed Jam” on page 91 “No Developer Cartridge Installed” on page 91 “Wrong Developer Cartridge Installed” on page 91 “Installed Developer Cartridge is Not a Genuine Epson Product” on page 92 “Developer Cartridge Memory Error” on page 92 “Toner Out” on page 92 “Front Cover Open” on page 92 “Output Cover Open” on page 93 “Printing on Incorrect Paper Size” on page 93 “Unsupported Paper Size” on page 93
EPSON AcuLaser M1200 Series Status/Error/Warning User’s Guide INDICATOR LIGHTS Ready Error “Installed Developer Cartridge is Not a Genuine Epson Product Warning” on page 94 OFF “Sleep mode” on page 95 OFF “Ready” on page 95 OFF “Printing” on page 95 OFF “Processing Data” on page 95 OFF Note: If the problem remains after trying the suggestions in this section, contact your dealer or a qualified service representative for assistance.
EPSON AcuLaser M1200 Series User’s Guide Output Paper Jam Control panel: Ready and Error lights on Indicates that there may be a paper jam inside the printer. Open the printer’s output cover, remove any jammed paper, and close the cover. The error will automatically clear itself and the jammed page’s print data is reprinted. Paper Jam Control panel: Ready and Error lights on Indicates that there may be a paper jam inside the printer.
EPSON AcuLaser M1200 Series User’s Guide Either the installed developer cartridge is defective, or it is not the right one for your printer model. Replace it with a new or correct developer cartridge by following the instructions under “Developer Cartridge” on page 69. Installed Developer Cartridge is Not a Genuine Epson Product Control panel: Ready light on, Error light flashing The installed developer cartridge is not a genuine Epson product.
EPSON AcuLaser M1200 Series User’s Guide Output Cover Open Control panel: Ready and Error lights on The printer’s output cover is open. Make sure that the printer’s output cover is closed properly by opening and closing it again. Printing on Incorrect Paper Size Control panel: Ready light on, Error light flashing The paper loaded in the paper source does not match the required paper size. Replace with paper of the correct size and click Continue on the EPSON Status Monitor 3 window that appears.
EPSON AcuLaser M1200 Series User’s Guide Paper Size Warning Control panel: Ready light on The size of the paper that fed through the printer does not match the specified paper size. Click Close on the EPSON Status Monitor 3 window that appears to dismiss the warning. Not All Pages Are Printed Control panel: Ready light on This warning is displayed if an Insufficient Memory to Print Current Page error has occurred while Auto Continue is set to On.
EPSON AcuLaser M1200 Series User’s Guide This is a warning to inform you that the installed developer cartridge is not a genuine Epson product. The use of such products may damage the printer and cause the print quality to decrease. Remove the currently installed cartridge and replace it with a genuine Epson cartridge by following the instructions under “Developer Cartridge” on page 69. To temporarily dismiss the warning, click Close on the EPSON Status Monitor 3 window that appears.
EPSON AcuLaser M1200 Series User’s Guide AcuLaser M1200/EPL-6200L For Windows users Follow these steps to print a status sheet from the printer driver: 1. Click Start, point to Settings, and then click Printers. 2. Right-click the icon of your printer, and then click Properties in the menu that appears. 3. Click the Optional Settings tab, and then click Status Sheet. The printer starts printing a status sheet. For Macintosh users For Mac OS X 10.5 users 1.
EPSON AcuLaser M1200 Series User’s Guide Clearing Jammed Paper When paper is jammed in the printer, the EPSON Status Monitor 3 provides alert messages. Precautions for clearing jammed paper Be sure to observe the following points when you clear jammed paper: ❏ Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause other paper jams. Pull it gently in order to avoid tearing. ❏ Always try to remove jammed paper with both hands to avoid tearing it.
EPSON AcuLaser M1200 Series User’s Guide Note: The illustrations used in this procedure show the EPL-6200. 1. Close the output tray. 2. Open the printer’s front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull the cover towards you. Troubleshooting Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 3. Remove the developer cartridge. c Caution: ❏ When removing the developer cartridge, never touch the developing roller under the flap; otherwise, print quality may decline. ❏ Never touch the photoconductor unit’s light-sensitive drum; otherwise, print quality may decline. Troubleshooting Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 4. Carefully remove the paper from the paper path with both hands. Note: If the paper is difficult to pull out because only a small portion of the paper is visible, see “Paper jam — output cover” on page 100. 5. Reinstall the developer cartridge. 6. Close the printer’s front cover. Printing automatically restarts from the page that jammed.
EPSON AcuLaser M1200 Series User’s Guide 2. Open the printer’s output cover. 3. Carefully remove the paper from the paper path with both hands. 4. Close the output cover. Troubleshooting Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 5. Open and then close the printer’s front cover. The jammed page’s print data is automatically reprinted. Paper jam — MP tray (AcuLaser M1200/EPL-6200L) The following illustration shows what this type of jam looks like: Follow these steps to clear a feed jam at the MP tray: 1. Remove paper stacked on the MP tray. Troubleshooting Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide 2. Gently pull out any sheets that have fed part way into the printer. 3. Close the output tray, and open the printer’s front cover. 4. Remove any pieces of paper that may have torn off or are remaining in the printer, and then close the front cover. Note: If necessary, take out the developer cartridge and remove any paper left in the paper feed path. Then reinsert the cartridge. 5.
EPSON AcuLaser M1200 Series User’s Guide The Ready light is on but nothing prints Cause What to do Your computer may not be properly connected to the printer. Perform the procedure described in the Setup Guide. The interface cable may not be plugged in securely. Check both ends of the cable between the printer and the computer. Be sure to secure the connector using the wire retaining clips. You may not be using the correct interface cable.
EPSON AcuLaser M1200 Series User’s Guide Graphics don’t print correctly Cause What to do You may need more memory. Graphics require large amounts of memory. Lower the Print Quality setting in the printer driver. If your printer is the EPL-6200, you can also install more memory into the printer for a more permanent solution. There is a page that could not be printed (AcuLaser M1200/EPL-6200L only) Cause What to do There was not enough memory to print all the pages.
EPSON AcuLaser M1200 Series User’s Guide Black or white bands appear in the printout Cause What to do The paper path inside the printer may be dusty. Turn off the printer. Clean internal printer components by printing three pages with only one character per page. Your paper may be moist or damp. This printer is sensitive to moisture absorbed by the paper. The higher the moisture content in the paper, the lighter the printed output. Do not store paper in a humid or damp environment.
EPSON AcuLaser M1200 Series User’s Guide Completely blank pages Cause What to do The developer cartridge may be the end of its service life. If the toner status in the EPSON Status Monitor 3 utility indicates that the amount of toner is low, see “Developer Cartridge” on page 69 for information on replacing the developer cartridge. The developer cartridge is not installed correctly. Check that the developer cartridge is installed as described under “Developer Cartridge” on page 69.
EPSON AcuLaser M1200 Series User’s Guide Non-printed side of the page is dirty Cause What to do Toner may have spilled onto the paper feed path. Turn off the printer. Clean internal printer components. White spots, black dots, or black horizontal lines appear in a cyclic manner in the printout Cause What to do There may be a problem with the photoconductor unit. Turn off the printer. Remove the unit, and reinstall it.
EPSON AcuLaser M1200 Series User’s Guide Paper Handling Problems Note: ❏ The EPL-6200 comes with two standard paper sources, i.e., the MP tray and the manual feed slot. The MP tray is the available paper source for the AcuLaser M1200/EPL-6200L. ❏ The optional 500-Sheet Lower Paper Cassette Unit A4 is available only for the EPL-6200. Paper does not feed properly Cause What to do The paper guides are not set correctly.
EPSON AcuLaser M1200 Series User’s Guide Appendix A Technical Specifications Paper Available paper types This section explains what kind of paper you can use with your printer. Be sure only to use paper mentioned in this section. Note: The printer is extremely sensitive to moisture. Be sure to store your paper in a dry environment. General paper You can use the following paper.
EPSON AcuLaser M1200 Series User’s Guide Note: ❏ Since the quality of any particular brand or type of media may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any type of media. Always test samples of media stock before purchasing large quantities or printing large jobs. ❏ You may use paper with preprinted letterheads, provided that the paper and ink are both compatible with laser printers.
EPSON AcuLaser M1200 Series User’s Guide Specifications Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Paper Types Plain paper, recycled paper, labels, envelopes, transparencies, colored paper, thick paper, letterhead Note: Use recycled paper under normal temperature and humidity conditions only.
EPSON AcuLaser M1200 Series User’s Guide Printable area EPL-6200 Minimum 4-mm margin on all sides AcuLaser M1200/ EPL-6200L Minimum 5-mm margin on all sides Printer General Printing method Laser beam scanning and dry electrophotographic process Resolution EPL-6200: 1200 dpi, Class 1200 dpi, or 600 dpi, 300 dpi AcuLaser M1200/EPL-6200L: 600 dpi First print Less than 13 seconds with A4/Letter paper (When feeding from MP tray) Paper feed EPL-6200: Automatic or manual feed AcuLaser M1200/EPL-6200L:
EPSON AcuLaser M1200 Series User’s Guide Environmental Temperature Humidity Altitude Operation 10 to 35˚C (50 to 95˚F) Storage 0 to 35˚C (32 to 95˚F) Operation 15 to 85% RH Storage 30 to 85% RH 2,500 meters (8,200 feet) maximum Standards and approvals Safety standards European model Directive 2006/95/EC EN60950-1 EMC European model Directive 2004/108/EC EN 55022 class B EN 55024 EN 61000-3-2 EN 61000-3-3 Mechanical Dimensions and weight EPL-6200 Height: 261 mm (10.4 in.
EPSON AcuLaser M1200 Series User’s Guide Electrical Check the label on the back of the printer for the voltage of your printer. AcuLaser M1200/EPL-6200L 110 to 120 V Model 220 to 240 V Model Rated voltage 110 V - 120 V 220 V - 240 V Rated frequency 50 Hz - 60 Hz 50 Hz - 60 Hz Rated current 8.0 A 4.
EPSON AcuLaser M1200 Series User’s Guide ❏ USB 2.0 can be used with Windows Vista, Vista x64, XP, XP x64, and 2000 operating systems. Ethernet interface You can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pair interface cable with an RJ45 connector. Note: Ethernet Interface may not be available depending on the printer model.
EPSON AcuLaser M1200 Series User’s Guide Appendix B Working with Fonts EPSON BarCode Fonts (Windows only) EPSON BarCode Fonts let you easily create and print many types of bar codes. Normally, bar code creation is a laborious process requiring you to specify various command codes, such as Start bar, Stop bar and OCR-B, in addition to the bar code characters themselves.
EPSON AcuLaser M1200 Series User’s Guide Bar code Standard EPSON BarCode OCR-B Check Digit Comments Codabar EPSON Codabar No No Printing of OCR-B and check digits can be specified with the font name.
EPSON AcuLaser M1200 Series User’s Guide 3. In the dialog box that appears, click Software List. 4. Select the EPSON BarCode Font check box and click Install. Then follow the on-screen instructions. 5. When installation is complete, click OK. EPSON BarCode Fonts are now installed on your computer. Printing with EPSON BarCode Fonts Follow these steps to create and print bar codes using EPSON BarCode Fonts. The application featured in these instructions is Microsoft WordPad.
EPSON AcuLaser M1200 Series User’s Guide 3. Select the EPSON BarCode Font you want to use, then set the font size and click OK. Note: In Windows Vista, XP, or 2000, you cannot use font sizes larger than 96 points when printing bar codes. 4. The characters you selected appear as bar code characters similar to those shown below. 5. Select Print from the File menu, then select your Epson printer and click Properties. Make the following printer driver settings. EPL-6200 is a monochrome printer.
EPSON AcuLaser M1200 Series User’s Guide Monochrome Printer Driver Color Printer Driver Host-Based Monochrome Printer Driver Zoom Options Not selected Not selected Not selected Graphic mode (in the Extended Settings dialog box accessed through the Optional Settings tab) High Quality (Printer) (not available) (not available) Printing Mode (in the Extended Settings dialog box accessed through the Optional Settings tab) (not available) High Quality (Printer) (not available) 6.
EPSON AcuLaser M1200 Series User’s Guide Note: Depending on the print density, or on the quality or color of the paper, bar codes may not be readable with all bar code readers. Print a sample and make sure the bar code can be read before printing large quantities. BarCode Font specifications This section contains details on the character input specifications for each EPSON BarCode Font. EPSON EAN-8 ❏ EAN-8 is an eight-digit abbreviated version of the EAN bar code standard.
EPSON AcuLaser M1200 Series User’s Guide EPSON EAN-13 ❏ EAN-13 is the standard 13-digit EAN bar code. ❏ Because the check digit is added automatically, only 12 characters can be input. Character type Numbers (0 to 9) Number of characters 12 characters Font size 60 pt to150 pt (up to 96 pt in Windows Vista, XP, and 2000). Recommended sizes are 60 pt, 75 pt (standard), 112.5 pt and 150 pt.
EPSON AcuLaser M1200 Series Font size User’s Guide 60 pt to150 pt (up to 96 pt in Windows Vista, XP, and 2000). Recommended sizes are 60 pt, 75 pt (standard), 112.5 pt and 150 pt.
EPSON AcuLaser M1200 Series User’s Guide ❏ The numeral “0” Print Sample EPSON UPC-E EPSON Code39 ❏ Four Code39 fonts are available, allowing you to enable and disable the automatic insertion of check digits and OCR-B. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the Code39 standard. For this reason, it is important to keep at least one space between the bar code and the surrounding text to prevent overlapping.
EPSON AcuLaser M1200 Series User’s Guide Print Sample EPSON Code39 EPSON Code39 CD EPSON Code39 Num EPSON Code39 CD Num EPSON Code128 ❏ Code128 fonts support code sets A, B, and C. When the code set of a line of characters is changed in the middle of the line, a conversion code is automatically inserted. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the Code128 standard.
EPSON AcuLaser M1200 Series User’s Guide ❏ Check digit ❏ Change code set character Print Sample EPSON Code128 EPSON ITF ❏ The EPSON ITF fonts conform to the USS Interleaved 2-of-5 standard (American). ❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automatic insertion of check digits and OCR-B. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the Interleaved 2-of-5 standard.
EPSON AcuLaser M1200 Series User’s Guide Print Sample EPSON ITF EPSON ITF CD EPSON ITF Num EPSON ITF CD Num EPSON Codabar ❏ Four Codabar fonts are available, allowing you to enable and disable the automatic insertion of check digits and OCR-B. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the Codabar standard. For this reason, it is important to keep at least one space between the bar code and the surrounding text to prevent overlapping.
EPSON AcuLaser M1200 Series User’s Guide The following codes are inserted automatically and need not be input by hand: ❏ Left/Right quiet zone ❏ Start/Stop character (when not input) ❏ Check digit Print Sample EPSON Codabar EPSON Codabar CD EPSON Codabar Num EPSON Codabar CD Num Working with Fonts Downloaded from ManualsPrinter.
EPSON AcuLaser M1200 Series User’s Guide Appendix C Customer Support Contacting Customer Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact customer support services for assistance. If customer support for your area is not listed below, contact the dealer where you purchased your product.
EPSON AcuLaser M1200 Series User’s Guide Internet URL http://www.epson.com.au Access the Epson Australia World Wide Web pages. Worth taking your modem here for the occasional surf! The site provides a download area for drivers, Epson contact points, new product information and technical support (e-mail). Epson Helpdesk Epson Helpdesk is provided as a final backup to make sure our clients have access to advice.
EPSON AcuLaser M1200 Series User’s Guide Help for Users in Thailand Contact for information, support, and services are: World Wide Web (http://www.epson.co.th) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and e-mail are available.
EPSON AcuLaser M1200 Series User’s Guide Epson Hotline ❏ Sales enquiries and product information ❏ Technical support Phone (62) 21-572 4350 Fax (62) 21-572 4357 Epson Service Center Jakarta Mangga Dua Mall 3rd floor No 3A/B Jl. Arteri Mangga Dua, Jakarta Phone/Fax: (62) 21-62301104 Bandung Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Phone/Fax: (62) 22-7303766 Surabaya Hitech Mall lt IIB No. 12 Jl.
EPSON AcuLaser M1200 Series User’s Guide Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited.
EPSON AcuLaser M1200 Series Phone: 603-56288288 Fax: 603-56288388/399 User’s Guide Epson Helpdesk ❏ Sales enquiries and product information (Infoline) Phone: 603-56288222 ❏ Enquiries on repair services & warranty, product usage and technical support (Techline) Phone: 603-56288333 Help for Users in India Contacts for information, support, and services are: World Wide Web (http://www.epson.co.in) Information on product specifications, drivers for download, and products enquiry are available.
EPSON AcuLaser M1200 Series Location Telephone number Fax number Cochin 0484-2357950 0484-2357950 Coimbatore 0422-2380002 NA Pune 020-30286000 /30286001/30286002 020-30286000 Ahmedabad 079-26407176 / 77 079-26407347 User’s Guide Helpline For Service, Product info or to order a cartridge - 18004250011 (9AM - 9PM) - This is a Toll-free number.
EPSON AcuLaser M1200 Series User’s Guide Index C Canceling printing From the computer (Macintosh)...................................57 From the computer (Windows).....................................44 Cleaning Inside printer....................................................................80 Paper path rollers.............................................................83 Printer case.......................................................................80 Removing spilled toner........................
EPSON AcuLaser M1200 Series P Paper Preventing paper jams.....................................................97 Printable area..................................................................113 Prohibited.......................................................................111 Special media....................................................................25 Specifications.........................................................110, 112 Supported........................................................
EPSON AcuLaser M1200 Series User’s Guide Ethernet interface..........................................................116 Mechanical......................................................................114 Paper................................................................................110 Parallel interface.............................................................115 Photoconductor unit.....................................................116 Standards and approvals..................................
