User`s guide

SIMULATION SIMULATION
PROF
Settings
NONE / SWOP / Euroscale /
CommercialPress / JapanCol‐
or / TOYO / DIC
Specify the simulation profile.
If NONE is selected, no simulation profile is speci‐
fied.
Simulation profiles downloaded with the
Web-Based EpsonNet Config are available as SIM-
ULATION PROF.
SIM. INTENT Settings
RELATIVE COLOR / ABSO‐
LUTE COLOR
Specify the characteristic of the simulation profile.
If RELATIVE COLOR is selected, relative color is
applied to the simulation profile.
If ABSOLUTE COLOR is selected, absolute color is
applied to the simulation profile.
CMYK GRAY Settings
COMPOSITE BLACK / BLACK
AND GRAY / BLACK ONLY
Specify how black and grays are reproduced using
the four CMYK colors.
If COMPOSITE BLACK is selected, black is repro‐
duced using the CMYK colors.
If BLACK AND GRAY is selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected, black is reproduced
using only black.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 81