User`s guide

TRAY MAPPING TRAY MAPPING MD. Settings

ON / OFF

Select whether or not the Tray Mapping function is used.

LOGICAL TRAY0 - LOGICAL

TRAY9

Settings

PHYSICAL TRAY1 / PHYSICAL TRAY2 /

PHYSICAL TRAY3

Select the tray that is used for printing when a print job is

received from another manufacturer’s printer driver.

The default settings are PHYSICAL TRAY1 for LOGICAL TRAY1

and PHYSICAL TRAY2 for other trays.

Note:

PHYSICAL TRAY3 appears only if an optional 500-Sheet Paper

Cassette Unit is installed.

DUPLEX Settings

OFF / LONG EDGE / SHORT EDGE

If LONG EDGE is selected, the pages will be printed on both

sides of the paper for long-edge binding.

If SHORT EDGE is selected, the pages will be printed on both

sides of the paper for short-edge binding.

The setting specified in the printer driver will override this

menu setting.

COPIES Settings

1-9999 (Default: 1)

Specify the number of copies to be printed.

The setting specified in the printer driver will override this

menu setting.

COLLATE

Settings

ON / OFF

Select whether or not to enable collated (sort) printing.

The setting specified in the printer driver will override this

menu setting.

This menu item appears only if an optional 500-Sheet Paper Cassette Unit is installed.

This menu item appears only if an optional Hard Disk Drive is installed.

QUALITY MENU

Note:

Manufacturer’s default settings appear in bold.

Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide

Control Panel and Configuration Menu 69