User`s guide

Output Tray
All media is fed out facing down into the output tray on the machine. This tray has a capacity of
approximately 150 sheets (A4/Letter) of plain paper, 80 g/m² or 10 sheets (A4/Letter) of special paper,
80 g/m².
Note:
❏ If the media is stacked too high in the output tray, your printer may experience media misfeeds,
excessive media curl, or static buildup.
❏ The output tray can be extended. Adjust the output tray according to the size of paper to be printed
on.
Media Storage
❏ Keep media on a flat, level surface in its original wrapper until it is time to load it.
Media that has been stored for a long time out of its packaging may dry up too much and cause
misfeeding.
❏ If media has been removed from its wrapper, place it in its original packaging and store in a cool,
dark place on a level surface.
❏ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35˚C [95˚F]), and dust.
❏ Avoid leaning media against other objects or placing it in an upright position.
Before using stored media, do a trial print to check print quality.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Media Handling 110