Operation Manual

3. Enter ping xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of your printer), and then press the
Enter key.
4. Reply from the IP address denotes printer is active on the network.
See Also:
“Printing and Checking the System Settings Page” on page 65
Printing and Checking the System Settings Page
Print the System Settings page and check your printer’s IP address by using the operator panel.
1. On the operator panel, press the System button.
2. Select Report/List, and then press the button.
3. Select System Settings, and then press the
button.
The System Settings page is printed.
4. Confirm the IP address next to IP Address under Network (Wired) on the System Settings page.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then
print the System Settings page again.
If the IP address is not resolved automatically, see “Assigning an IP Address (for IPv4 Mode)” on
page 62.
Installing Print Driver on Computers Running Windows
Identifying Print Driver Pre-install Status (For Network Connection Setup)
Before installing the print driver on your computer, print the System Settings page to check the IP
address of your printer.
The Operator Panel
1. Press the System button.
Epson AcuLaser CX29 Series User’s Guide
Network Basics 65