Operation Manual

Setting Initial Settings on the Operator Panel
You need to set the printer language, region, clock date, and time when you turn on printer for the first
time.
When you turn on the printer, a wizard appears on the LCD panel. Follow the steps below to set the
initial settings.
Note:
If you do not start configuring the initial settings, Ready appears on the LCD panel in three minutes.
After that, you can set the following initial setup by enabling Power On Wizard on the LCD panel or
EpsonNet Config if needed.
For more information on operator panel, see “Understanding the Printer Menus” on page 227.
For more information on EpsonNet Config, see “EpsonNet Config” on page 52.
1. Please Select Language appears. Select the language you want to use on the operator panel
from the following drop-down list, and then press the
button.
English
Français
Italiano
Deutsch
Español
Nederlands
Português
Pусский
Türkçe
Traditional Chinese
Korean
2. Press the button to start setting the region.
3. Select your region, and then press the
button.
4. Select the appropriate time zone, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Basic Operation 49