Operation Manual

Supply Setting Function
Print media
Multiple-Up in the Layout
tab
The printer prints two or more pages on one side of a sheet.
Values for Multiple-Up are 2 Pages Up, 4 Pages Up, 8 Pages Up,
16 Pages Up, 32 Pages Up. Combined with the duplex setting,
Multiple-Up a l lo w s yo u t o p ri nt up to 64 p ag es o n o n e s hee t of
paper (32 images on the front and 32 on the back).
Checking Page Counts
The total number of printed pages can be checked at the operator panel. Three meters are available:
Total Impression, Color Impression, and Black Impression.
The Billing Meters counts the number of pages printed properly. Single side color print (including
N-up) is counted as one job, and 2-sided print (including N-up) is counted as two. During 2-sided
printing, if an error occurs after one side is printed properly, it is counted as one.
When printing color data, which has been converted by using ICC profile on an application, with the
Color (Auto) setting, the data is printed by color even if it seems to be black and white data on the
monitor. In that case, Total Impression is increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page.
For information about the individual meter, see “Billing Meters” on page 229.
Use the following procedure to check a meter:
1. Press the System button.
2. Select Billing Meters, and then press the
button.
3. Select the desired meter to check the number of pages.
Moving the Printer
This section describes how to move the printer.
Important:
❏ Two people are required to move the printer.
Epson AcuLaser CX29 Series User’s Guide
Maintenance 426