Operation Manual

Message What You Can Do
M - CRUM Error
Error 093-951
Restart Printer
Turn off the printer. Confirm the magenta cartridge is correctly installed, and
turn on the printer. Contact customer support if this failure is repeated.
C - CRUM Error
Error 093-952
Restart Printer
Turn off the printer. Confirm the cyan cartridge is correctly installed, and turn on
the printer. Contact customer support if this failure is repeated.
Invalid Toner
Yellow
Open the side cover. Remove the unsupported yellow cartridge, and install a
supported cartridge.
Invalid Toner
Magenta
Open the side cover. Remove the unsupported magenta cartridge, and install a
supported cartridge.
Invalid Toner
Cyan
Open the side cover. Remove the unsupported cyan cartridge, and install a
supported cartridge.
Insert Yellow
Toner Cartridge
Open the side cover, and make sure that the yellow cartridge is fully installed.
Insert Magenta
Toner Cartridge
Open the side cover, and make sure that the magenta cartridge is fully installed.
Insert Cyan
Toner Cartridge
Open the side cover, and make sure that the cyan cartridge is fully installed.
Insert Black
Toner Cartridge
Open the side cover, and make sure that the black cartridge is fully installed.
RAM Error
Error 116-316
Restart Printer
Turn off the printer. Remove the 512 MB additional memory module from the
slot, and then reattach it firmly. Turn on the printer. Contact customer support if
this failure is repeated.
Controller Error
Error 116-317
Restart Printer
Turn off the printer, and turn it on again. Contact customer support if this failure
is repeated.
RAM Error
Error 116-320
Restart Printer
Remove the unsupported additional memory module. Contact customer sup-
port if this failure is repeated.
Epson AcuLaser CX29 Series User’s Guide
Troubleshooting 382