Operation Manual

Message What You Can Do
Insert
Drum Cartridge
Open the front cover, and make sure that the drum cartridge is fully installed.
CTD Sensor
Replace Soon
Clean the CTD sensor.
CTD Sensor Error
Restart Printer
Low Yellow Density.
Remove Yellow Toner,
Shake Cartridge,
and Reinstall.
Remove and shake the yellow cartridge. Contact customer support if this failure
is repeated.
Low Magenta Density.
Remove Magenta Toner,
Shake Cartridge,
and Reinstall.
Remove and shake the magenta cartridge. Contact customer support if this
failure is repeated.
Low Cyan Density.
Remove Cyan Toner,
Shake Cartridge,
and Reinstall.
Remove and shake the cyan cartridge. Contact customer support if this failure is
repeated.
Low Black Density.
Remove Black Toner,
Shake Cartridge,
and Reinstall.
Remove and shake the black cartridge. Contact customer support if this failure is
repeated.
Blk - CRUM Error
Error 093-925
Restart Printer
Turn off the printer. Confirm the black cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Invalid Toner
Black
Open the side cover. Remove the unsupported black cartridge, and install a
supported cartridge.
Y - CRUM Error
Error 093-950
Restart Printer
Turn off the printer. Confirm the yellow cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Epson AcuLaser CX29 Series User’s Guide
Troubleshooting 381