Operation Manual

Copy Quality Problems
Problem Action
There are lines or streaks in copies
made from the ADF.
There is debris on the ADF glass. When scanning, the paper from the ADF passes
over the debris creating lines or streaks.
Clean the ADF glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 385
There are spots in copies taken from the
document glass.
There is debris on the document glass. When scanning, the debris creates a spot on
the image.
Clean the document glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 385
The reverse side of the original is
showing on the copy.
Use the Lighten option on the Copy menu.
For information on making the image lighter, see “Lighten/Darken” on page 140.
Light colors are washed out or white on
the copy.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see “Auto Exposure” on
page 142.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see “Lighten/Darken” on
page 140.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Adjusting Color Registration
This section describes how to adjust the color registration when you first install the printer or after
moving it to a new location.
Epson AcuLaser CX29 Series User’s Guide
Troubleshooting 354