Operation Manual

Mottle
Problem Action
The printed result has mottled
appearance.
Verify that the print media recommended for the printer is being used.
If you use non-recommended print media, use the print media recommended for
the printer.
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Adjust the transfer bias.
1. On the operator panel, press the System button and select Admin Menu —
Maintenance — Adjust BTR.
2. Adjust the setting for the type of print media being used.
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Ghosting
Epson AcuLaser CX29 Series User’s Guide
Troubleshooting 344