Operation Manual

Random Spots/Blurred Images
Problem Action
The printed result has random spots or
is blurred.
Ensure that the toner cartridges are installed correctly.
See Also:
“Installing a Toner Cartridge” on page 401
If the problem persists, ensure that the drum cartridge is installed correctly.
Ensure that the drum cartridge is installed correctly.
See Also:
❏ “Replacing the Drum Cartridge” on page 403
❏ “Installing the Drum Cartridge” on page 407
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See Also:
❏ “Replacing the Drum Cartridge” on page 403
❏ “Installing the Drum Cartridge” on page 407
If the problem persists, contact the Epson local representative office or an
authorised dealer.
The Entire Output Is Blank
Epson AcuLaser CX29 Series User’s Guide
Troubleshooting 339