Operation Manual

Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer switches to the Power Saver mode after
the specified time.
To set the power saver timer:
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select System Settings, and then press the
button.
4. Select Power Saver Timer, and then press the
button.
5. Select Low Power Timer or Sleep Timer, and then press the
button.
6. Press the
or button or enter the desired value using the number keypad, and then press the
button.
You can select from 3–60 minutes for Low Power Timer or 1–6 minutes for Sleep Timer.
7. To return to the previous screen, press the
(Back) button.
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset to
their default values.
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Maintenance, and then press the
button.
4. Select Initialize NVM, and then press the
button.
5. Select the desired setting, and then press the
button.
6. Select Yes, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 301