Operation Manual

Note:
Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving
device.
Lighten/Darken
Purpose:
To adjust the density to make the copy lighter or darker than the original.
Values:
Lighter3
Works well with dark print.
Lighter2
Lighter1
Normal*
Works well with standard typed or printed documents.
Darker1
Works well with light print or faint pencil markings.
Darker2
Darker3
Delayed Start
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
21:00*/9:00PM*
Specify the fax transmission start time when sending a fax at a specified time.
0:00 – 23:59 /
1:00 – 12:59AM/PM
Note:
A maximum of 19 delayed fax jobs can be stored in this printer.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 289