Operation Manual

Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
4 mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0 mm*/0.0 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Scan Defaults
To modify the defaults for the Scan menu.
Scan Defaults allows you to configure the following items in addition to the items under the Scan
menu.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Scan to Network
Purpose:
To store the scanned image on a network server or a computer.
Values:
Computer(Network)*
Stores the scanned image on a computer using the Server Message Block (SMB)
protocol.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 282