Operation Manual

Black High Dens. 0*
Sets the color balance level of high density black.
-3 to +3
2-Sided
Purpose:
To print on both sides of a sheet of paper.
Values:
1−>1-Sided*
Prints on one side of a sheet of paper.
Long Edge Binding
Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Binding
Prints on both sides of a sheet of paper to be bound by short edge.
N-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Does not perform N-up printing.
Auto
Automatically reduces the original pages to fit onto one sheet of paper.
ID Card Copy
Prints the original pages onto one sheet of paper in the original size.
Manual
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4 mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 281