Operation Manual

Auto Regi Adjust
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Off
Does not automatically perform color registration adjustment.
On*
Automatically performs color registration adjustment.
Adjust ColorRegi
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after
the printer is moved.
Note:
The Adjust ColorRegi feature can be configured when Auto Regi Adjust is set to Off.
Values:
Auto Adjust
Automatically performs color registration correction.
Color Regi Chart
Prints a color registration chart. The color registration chart prints a
lattice pattern of yellow, magenta, and cyan lines. On the chart, find the
values on the right side that are next to the line that is perfectly straight
for each of the three colors. If the value for this line is 0, color registration
adjustment is not required. If the value for this line is any value other
than 0, specify the adjustment values for lateral adjustment and process
adjustment under Enter Number.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 266