Operation Manual

HW Gloss Card 0*
-6 to +6
Adjust Fuser
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has
curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to
increase the temperature.
Note:
The print quality changes depending on the setting values you select for this item.
Values:
Plain 0*
-6 to +6
Light Card 0*
-6 to +6
Heavy Card 0*
-6 to +6
Envelope 0*
-6 to +6
Labels 0*
-6 to +6
LW Gloss Card 0*
-6 to +6
HW Gloss Card 0*
-6 to +6
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 265