Operation Manual

Values:
Off
Disables the fault time-out.
On* 60sec*
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
3–300 sec.
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is
cancelled if the time-out time is exceeded.
Values:
Off
Disables the job time-out.
On* 30sec*
Sets the time the printer waits for data to arrive from the computer.
5–300 sec.
Clock Settings
Purpose:
To specify the date and time formats.
Values:
Set Date & Time Time Zone
Sets the time zone.
Set Date
Sets the date depending on the Date Format settings.
Set Time
Sets the time.
Date Format yy/mm/dd
Sets the date format.
mm/dd/yy
dd/mm/yy*
Time Format 12H
Sets the time in 12-hour format.
24H*
Sets the time in 24-hour format.
*1
The default for Date Format varies depending on country-specific factory default.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 255