Operation Manual

Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Turns off the volume of the ring tone.
Min
Sets the volume of the ring tone to Min.
Middle
Sets the volume of the ring tone to Middle.
Max*
Sets the volume of the ring tone to Max.
Line Type
Purpose:
To select the default line type.
Values:
PSTN*
Uses PSTN.
PBX
Uses PBX.
Dialing Type
Purpose:
To select the dialing type.
Values:
PB*
Uses tone dialing.
DP(10PPS)
Sets “DP (10PPS)” (Dial Pulse, 10 Pulse Per Second) as the dial type.
DP(20PPS)
Sets “DP (20PPS)” (Dial Pulse, 20 Pulse Per Second) as the dial type.
Interval Timer
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is 8 seconds.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 245