Operation Manual

DRPD Mode
Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive
ring service must be installed on your telephone line by the telephone
company. After the telephone company has provided a separate number for
faxing with a distinctive ring pattern, configure the fax setup to monitor for that
specific ring pattern.
Auto Answer Fax
Purpose:
To set the interval at which the printer goes into the fax receive mode after receiving an incoming call.
The interval can be specified within the range of 0 to 255 seconds. The default is 0 second.
Auto Ans. TEL/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external telephone
receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The
default is 6 seconds.
Auto Ans. Ans/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external answering
machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds.
The default is 21 seconds.
Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
Off
Turns off the volume of the line monitor.
Min
Sets the volume of the line monitor to Min.
Middle*
Sets the volume of the line monitor to Middle.
Max
Sets the volume of the line monitor to Max.
Epson AcuLaser CX29 Series User’s Guide
Using the Operator Panel Menus and Keypad 244