Operation Manual

Option Description
Fax Transmit
You can set whether to print a transmission result after a fax
transmission.
Fax Broadcast
You can set whether to print a transmission result after a fax broadcast
to multiple locations.
Fax Protocol
You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
Prefix Dial
Note:
Prefix Dial supports only the environment where you send a fax to the external line number. To use
Prefix Dial, you must do the following from the operator panel.
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Fax Settings, and then press the
button.
4. Select Line Type, and then press the
button.
5. Select PBX, and then press the
button.
6. Select Prefix Dial, and then press the
button.
7. Select On, and then press the
button.
8. Select Prefix Dial Num, and then press the
button.
9. Enter an up-to-five-digit prefix number from 0–9, *, and #, and then press the
button.
10. Reboot the printer by turning the power switch off and then on.
Changing Setting Options
1. Press the System button.
2. Select Defaults Settings, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Faxing 224