Operation Manual

2. Select Polling Receive, and then press the button.
3. Select On, and then press the
button.
4. Enter the number of the remote machine using the numeric keypad, and then press the
button.
Note:
For information on how to enter the fax number of the remote machine, see “Sending a Fax
Automatically” on page 198 or “Sending a Fax Manually” on page 199.
5. Press the Start button.
Automatic Dialing
Speed Dialing
You can store up to 200 frequently dialed numbers in speed dial locations (001–200).
When the speed dial job specified in the delayed fax or redial exists, you cannot change the speed dial
number from the operator panel or EpsonNet Config.
Storing a Number for Speed Dialing
1. Press the Address Book button.
2. Select Phone Book, and then press the
button.
3. Select Speed Dial, and then press the
button.
4. Select the desired speed dial number between 001 and 200, and then press the
button.
5. Select Name, and then press the
button.
6. Enter the name, and then press the
button.
7. Select Fax Number, and then press the
button.
8. Enter the number you want to store using the numeric keypad, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Faxing 211