Operation Manual

3. Adjust the document resolution to suit your fax needs.
See Also:
❏ “Resolution” on page 196
❏ “Lighten/Darken” on page 197
4. Select Delayed Start, and then press the
button.
5. Select On, and then press the
button.
6. Enter the start time using the numeric keypad or select the start time using the
or button, and
then press the
button.
7. Select Fax to, and then press the
button.
8. Select Keypad, and then press the
button.
9. Enter the number of the remote machine using the numeric keypad, and then press the
button.
You can also use speed or group dial numbers.
See Also:
“Automatic Dialing” on page 211
10. Press the Start button to scan data.
Once Delayed Start mode is activated, your printer stores all of the documents to be faxed into its
memory and sends them at the specified time. After faxing in the Delayed Start mode is complete, the
data in the memory is cleared.
Note:
If you turn off and on the printer, the stored documents are sent as soon as the printer is activated.
Sending a Fax from the Driver (Direct Fax)
You can send a fax directly from the computer running a Microsoft
®
Windows
®
operating system or
Mac OS
®
X by using the driver.
Note:
Only black and white faxes can be sent using Direct Fax.
Epson AcuLaser CX29 Series User’s Guide
Faxing 202