Operation Manual

You need to register a speed dial number before you can use the One Touch Dial button. (For

details, see “Storing a Number for Speed Dialing” on page 211.)

❏ Select Fax to, and then press the Address Book button. Select one of the followings:

All Entries

Displays a list of registered fax numbers.

Group Dial

Displays a list of registered group dial numbers.

Search Local

Searches for a fax number from the local Phone Book.

Search Server

Searches for a fax number on the LDAP server. This item is displayed when Server

Phone Book in the System Settings menu is set to On.

❏ Press the Redial/Pause button to redial, and go to step 6.

❏ Press the Speed Dial button. (For details, see “Sending a Fax Using a Speed Dial” on

page 212.)

5. Select the desired recipient, and then press the

button to select the recipients. Press the

button to confirm.

6. Press the Start button.

When the document is placed on the document glass, the display prompts you for another page.

Select Yes to add more documents or No to begin sending the fax immediately, and then press the

button.

The printer starts dialing the number, and then sending the fax when the remote fax machine is

ready.

Note:

By pressing the Stop button, you can cancel the fax job at any time while sending the fax.

Sending a Fax Manually

1. Load the document(s) face up with top edge in first into the ADF.

Place a single document face down on the document glass, and close the document cover.

Epson AcuLaser CX29 Series User’s Guide

Faxing 199